Design and analysis of building evacuation system’s controller using FPGA / Nurul Fatihah Jusoh, Sukreen Hana Herman and Suhana Sulaiman
This work is focused on the hardware support for improving an emergency evacuation known as decision support system, “op_sys”. The Controller Operating System Unit is a module in “op_sys” that is designed to improve occupants' information if there is an emergency situation such as fires is...
Saved in:
Main Authors: | , , |
---|---|
Format: | Article |
Language: | English |
Published: |
UiTM Press
2018
|
Subjects: | |
Online Access: | https://ir.uitm.edu.my/id/eprint/63041/1/63041.pdf https://ir.uitm.edu.my/id/eprint/63041/ https://jeesr.uitm.edu.my/v1/ |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | This work is focused on the hardware support for
improving an emergency evacuation known as decision support
system, “op_sys”. The Controller Operating System Unit is a
module in “op_sys” that is designed to improve occupants'
information if there is an emergency situation such as fires is
occured. This module is handled through Controller Alarm and
Controller System Floor, by displaying the data output through
FPGA board on three varieties of manually selected modes at
FPGA board. Also, the Controller System Floor is tested for
simulation waveform using Modelsim Altera EDA application
software. The compilation for hardware verification functionality,
simulation waveform functionality, and timing analysis show the
results is consistent and met the specification requirement with the
theoretical analysis. Furthermore, the estimated of four alarm
sensors and controller system floor is required if the system is
implemented for the future work. |
---|