Characterisation and model updating of modal parameters of a car hood structure / Mohamad Shamsul Azraf Sulaiman

Mechanical joints are commonly used in engineering application to form assembled structures such as car Body in White (BiW) and aerospace structures. Understandably, the mechanical joints have a significant effect to the dynamic characteristic of assembled structure because each of the joint in the...

Full description

Saved in:
Bibliographic Details
Main Author: Sulaiman, Mohamad Shamsul Azraf
Format: Thesis
Language:English
Published: 2020
Subjects:
Online Access:https://ir.uitm.edu.my/id/eprint/59650/1/59650.pdf
https://ir.uitm.edu.my/id/eprint/59650/
Tags: Add Tag
No Tags, Be the first to tag this record!
id my.uitm.ir.59650
record_format eprints
spelling my.uitm.ir.596502022-05-17T01:49:29Z https://ir.uitm.edu.my/id/eprint/59650/ Characterisation and model updating of modal parameters of a car hood structure / Mohamad Shamsul Azraf Sulaiman Sulaiman, Mohamad Shamsul Azraf TJ Mechanical engineering and machinery Mechanical joints are commonly used in engineering application to form assembled structures such as car Body in White (BiW) and aerospace structures. Understandably, the mechanical joints have a significant effect to the dynamic characteristic of assembled structure because each of the joint in the structure has its own joint properties such as slip factor, contact surface and non-linearity. Therefore, the overall dynamic characteristics of the jointed structure highly rely on the joints. On the other hand, finite element analysis (FEA) is a tool that commonly used by engineers to model and to reduce the number of physical prototypes in order to develop better products such as automotive parts. However, it has been found that there are huge discrepancies between the finite element analysis and experimental data due to invalid assumptions and simplification in modelling the joints in the finite element analysis. Consequently, the initial finite element model of the structure needs to be improved as close as possible to the experimental data. The aim of this research is to investigate the potential element connectors that can be used to represent the joints for spot weld and adhesive joints. The reliability of potential connector elements were quantified by comparing the predicted result calculated from commercial finite element analysis package with the experimental data. There were four types of element connectors used to model the adhesive joints and spot welds namely, RBE2, ACM2, CWELD and CWELD ELPAT and they were constructed based on three types of the case studies namely Case Study 1, Case Study 2 and Case Study 3. In the experimental work, the shaker and the roving accelerometers method were used to measure the modal parameters of the structure. The comparison reveals that the Case Study 3, which is the combination of element connectors Type 2 (ACM2) and Type 4 (CWELD ELPAT) have shown a better capability to represent the joints of the assembled structure with total error was 31.98 % while other finite element models, such as Case Study 1 and Case Study 2 with total error recorded were 263.23 % and 33.82 % respectively. The finite element model of Case Study 3 was then used in the optimisation method using model updating with MSC NASTRAN SOL200 algorithm to compute the sensitivity analysis based on the input parameters of the spot weld and adhesive joints and the body of the car hood structure. The predicted results obtained from the optimisation method has shown a significant achievement with total error was managed to reduce from 31.98 % to 19.92 %. The results reveal that, the predicted model using Case Study 3 procedure was the most appropriate to represent as spot weld and adhesive joints in the car hood structure. Furthermore, the optimisation method using model updating was successfully implemented and improving the correlation of the predicted results with experimental counterpart. 2020-05 Thesis NonPeerReviewed text en https://ir.uitm.edu.my/id/eprint/59650/1/59650.pdf (2020) Characterisation and model updating of modal parameters of a car hood structure / Mohamad Shamsul Azraf Sulaiman. Masters thesis, thesis, Universiti Teknologi MARA.
institution Universiti Teknologi Mara
building Tun Abdul Razak Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Teknologi Mara
content_source UiTM Institutional Repository
url_provider http://ir.uitm.edu.my/
language English
topic TJ Mechanical engineering and machinery
spellingShingle TJ Mechanical engineering and machinery
Sulaiman, Mohamad Shamsul Azraf
Characterisation and model updating of modal parameters of a car hood structure / Mohamad Shamsul Azraf Sulaiman
description Mechanical joints are commonly used in engineering application to form assembled structures such as car Body in White (BiW) and aerospace structures. Understandably, the mechanical joints have a significant effect to the dynamic characteristic of assembled structure because each of the joint in the structure has its own joint properties such as slip factor, contact surface and non-linearity. Therefore, the overall dynamic characteristics of the jointed structure highly rely on the joints. On the other hand, finite element analysis (FEA) is a tool that commonly used by engineers to model and to reduce the number of physical prototypes in order to develop better products such as automotive parts. However, it has been found that there are huge discrepancies between the finite element analysis and experimental data due to invalid assumptions and simplification in modelling the joints in the finite element analysis. Consequently, the initial finite element model of the structure needs to be improved as close as possible to the experimental data. The aim of this research is to investigate the potential element connectors that can be used to represent the joints for spot weld and adhesive joints. The reliability of potential connector elements were quantified by comparing the predicted result calculated from commercial finite element analysis package with the experimental data. There were four types of element connectors used to model the adhesive joints and spot welds namely, RBE2, ACM2, CWELD and CWELD ELPAT and they were constructed based on three types of the case studies namely Case Study 1, Case Study 2 and Case Study 3. In the experimental work, the shaker and the roving accelerometers method were used to measure the modal parameters of the structure. The comparison reveals that the Case Study 3, which is the combination of element connectors Type 2 (ACM2) and Type 4 (CWELD ELPAT) have shown a better capability to represent the joints of the assembled structure with total error was 31.98 % while other finite element models, such as Case Study 1 and Case Study 2 with total error recorded were 263.23 % and 33.82 % respectively. The finite element model of Case Study 3 was then used in the optimisation method using model updating with MSC NASTRAN SOL200 algorithm to compute the sensitivity analysis based on the input parameters of the spot weld and adhesive joints and the body of the car hood structure. The predicted results obtained from the optimisation method has shown a significant achievement with total error was managed to reduce from 31.98 % to 19.92 %. The results reveal that, the predicted model using Case Study 3 procedure was the most appropriate to represent as spot weld and adhesive joints in the car hood structure. Furthermore, the optimisation method using model updating was successfully implemented and improving the correlation of the predicted results with experimental counterpart.
format Thesis
author Sulaiman, Mohamad Shamsul Azraf
author_facet Sulaiman, Mohamad Shamsul Azraf
author_sort Sulaiman, Mohamad Shamsul Azraf
title Characterisation and model updating of modal parameters of a car hood structure / Mohamad Shamsul Azraf Sulaiman
title_short Characterisation and model updating of modal parameters of a car hood structure / Mohamad Shamsul Azraf Sulaiman
title_full Characterisation and model updating of modal parameters of a car hood structure / Mohamad Shamsul Azraf Sulaiman
title_fullStr Characterisation and model updating of modal parameters of a car hood structure / Mohamad Shamsul Azraf Sulaiman
title_full_unstemmed Characterisation and model updating of modal parameters of a car hood structure / Mohamad Shamsul Azraf Sulaiman
title_sort characterisation and model updating of modal parameters of a car hood structure / mohamad shamsul azraf sulaiman
publishDate 2020
url https://ir.uitm.edu.my/id/eprint/59650/1/59650.pdf
https://ir.uitm.edu.my/id/eprint/59650/
_version_ 1734303026749898752
score 13.222552