Acid battery tester / Muhammad Shafiq Rosli and Muhammad Syafiq Nordin

• Main Authors: Rosli, Muhammad Shafiq, Nordin, Muhammad Syafiq
• Format: Student Project
• Language: English
• Published: 2015
• Subjects: Production of electricity directly from chemical action; Electric apparatus and materials. Electric circuits. Electric networks
• Online Access: https://ir.uitm.edu.my/id/eprint/59304/1/59304.pdf; https://ir.uitm.edu.my/id/eprint/59304/

In this battery tester project I am innovate on how to measure voltages of the battery by using a simple device. Secondly I am planning to study and analyse a fast battery test without the need of power supply or expensive moving-coil voltmeters. Then, this project will use integrated circuit (IC), capacitors and resistors as the main components. The function of the (IC) actually to replace many separate electronic components which have been used to build a particular electronic circuit. The result will be getting by measuring voltages of the battery through components. The methodology of doing this project by setting SWl as shown in the circuit diagram, the device can test 3V to 15V batteries. When SWl is switched to the other position, only 1.5V cells can be tested. When Pl is open, a very light load is applied to the battery under test and Q3 base is biased in order to maintain LED D7 in the off state. Finally when testing 1.5V batteries, the circuit formed does not work well at this supply voltage, so a 150mA load current is applied to the BUT by means of the 10 Ohm resistor R3 after switching SWlA. Q3 bias is also changed via SWlB. As the conclusion, this battery tester project is applicable for those who are desire to measure their battery. This battery is made to easier the consumer to bring it anywhere as it is portable. In addition, the price at the market also is very cheap and affordable to buy by people. Life is much easier if every people could have one of it at home as it is made to measure small electrical equipment.