Mask snapper / Aizat Taqiuddin Mazwan ...[et al.]

• Main Authors: Mazwan, Aizat Taqiuddin, Shahrul Azhan, Iman Zulhaqim, Elias, Aiman Iskandar, Aminuddin, Nahit Bey, Suro Ahmadi, Shenessa A’esha Sahara
• Format: Student Project
• Language: English
• Subjects: Machine design and drawing; Machine construction (General)
• Online Access: https://ir.uitm.edu.my/id/eprint/56577/1/56577.pdf; https://ir.uitm.edu.my/id/eprint/56577/

The project encompassing from the start of the creating an idea of a product that can help society fighting against COVID-19, designing mask cutter, building a mask cutter that help with correct disposal of the mask. The team is consisting of 5 very passionate people that come together to build something great. From the start, some criteria are chosen to fit the goal of the project. Next, it is going to the drawing board. Some impressive design comes out from it but only one of them is chosen. The design that chosen is scrutinized under closer inspection as it will be the design that will carry forward after this and it will be harder is any complication is found down the line after. Thus, the calculation of the product itself has been done to make sure it can achieve its specific goal without compromising it safety and sturdiness. After the design past the checkmark, it come to prototyping. The prototype is built using SolidWork as 3D and stress test it to make sure there is no problem in the calculation and no oversight during it as well. From the start of the project until the end, all of the progress is documented and approved by supervisor.