The conversion of textile wastes into composite materials / Associate Professor Dr. Jamil Haji Salleh … [et al.]
Spinning mill produce a lot of waste fibres. Since the price of cotton and the cost of processing of textile are very high, it is a big loss. The main objective of this project is to convert cotton waste into composite material and study its properties. The cotton wastes (combed cotton wastes) will...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Research Reports |
| Language: | English |
| Published: |
2004
|
| Subjects: | |
| Online Access: | http://ir.uitm.edu.my/id/eprint/48892/1/48892.pdf http://ir.uitm.edu.my/id/eprint/48892/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Spinning mill produce a lot of waste fibres. Since the price of cotton and the cost of processing of textile are very high, it is a big loss. The main objective of this project is to convert cotton waste into composite material and study its properties. The cotton wastes (combed cotton wastes) will be mixed in variable proportion and made into composite. The cotton wastes have been collected from CNLT (M) Sdn. Bhd. and Woodard Textile Mills, Penang. The waste was impregnated with Polyester resin and fabricated into composite materials by compression method. Tensile Strength was determined using CRAG (Composite Research Advisory Method) test method 302 and Flexural Strength was determined using CRAG test method 200. Results of tensile and flexural strength show that the cotton waste composites have higher strength than the non -reinforced polyester plate. Treatment of silane to the fibres does not show any significance to reinforce the fibre matrix adhesion. |
|---|