Behavior of profiled steel sheet dry board system with window opening / Mohd Nizam Mohd Noah
The increase of construction activities in our country gives a problem shortage of construction material in market. Another thing the resources of composite material are decrease due to high demands. To overcome these problems one alternative that can be chosen is using alternative composite structu...
Saved in:
Main Author: | |
---|---|
Format: | Student Project |
Language: | English |
Published: |
Faculty of Civil Engineering
2002
|
Online Access: | http://ir.uitm.edu.my/id/eprint/18078/1/PPb_MOHD%20NIZAM%20MOHD%20NOAH%20EC%2002_5.pdf http://ir.uitm.edu.my/id/eprint/18078/ |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | The increase of construction activities in our country gives a problem shortage of construction material in market. Another thing the resources of composite material are decrease due to high demands. To overcome these problems one alternative that can be chosen is using alternative composite structure in building construction where it can minimize the using of shortage material. “Profiled Steel Sheet Dry Board System” is an innovative composite panel. The panel is formed by attaching dry boards to a core of profiled steel sheeting using mechanical connectors. It can be exploited for a variety of structural proposal. The panel is very light and therefore easily transportable and can be erected quickly by unskilled labour. Three specimens of panel were prepared and tested under uniformly distributed load. This experiment was divided into two, first the specimen of Profile Steel Sheet in normal condition. Second, the other two specimens of Profile Steel Sheet in overlap condition. The size of each specimen is 1000mm x 820mm and the window opening on the center of the specimen is 330mm x 400mm. The ultimate load for the first panel was 174 kN (non overlap) and that for the other two were 123 kN and 140 kN (overlap). |
---|