Surface roughness and roundness optimization on turning process of Aluminium Alloy with Taguchi Method / Sudjatmiko … [et al.]
In this study, surface roughness and roundness were established as process parameters on turning process of Aluminium Alloy by using Taguchi Method. Taguchi design of experiments (DOE) is used to analyze the effect of each parameters design. The four parameters are nose radius (nr), spindle speed (n...
Saved in:
Main Authors: | Sudjatmiko, djatmiko. mlg@gmail. com, Soenoko, Rudy, Suprapto, Agus, Choiron, Moch. Agus |
---|---|
Format: | Article |
Language: | English |
Published: |
Faculty of Mechanical Engineering Universiti Teknologi MARA (UiTM)
2017
|
Subjects: | |
Online Access: | http://ir.uitm.edu.my/id/eprint/17472/1/AJ_SUDJATMIKO%20JME%2017.pdf http://ir.uitm.edu.my/id/eprint/17472/ https://jmeche.uitm.edu.my/ |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Application of Taguchi methods in the optimization of cutting parameters for surface roughness in turning
by: Mohamad Naim, Yusoff
Published: (2008) -
Surface roughness study on aluminium in high speed turning process
by: Dahlan, Mohd Shazwan
Published: (2019) -
The Characterisrics And Failure Mechanisms Of Creep And Creep-Thermal Cycling Of Superheater Tube
by: Suprapto, Agus
Published: (2000) -
Optimization of the surface roughness for titanium Ti6A14V in turning process using Taguchi method
by: Samin, R., et al.
Published: (2020) -
The study on machining (turning process) for aluminium alloy
by: Ooi, Han Hooi
Published: (2004)