The analysis of a second order bandpass filter of a low noise CMOS instrumentation amplifier using mentor graphics / Haniza Burhan

• Main Author: Burhan, Haniza
• Format: Thesis
• Language: English
• Published: 1998
• Online Access: https://ir.uitm.edu.my/id/eprint/102193/1/102193.pdf; https://ir.uitm.edu.my/id/eprint/102193/

This thesis presents a report on my project titled "The Analysis of A Bandpass Filter of A Low Noise CMOS Instrumentation Amplifier Using Mentor Graphics". This project was taken from the IEEE Journal of Solid-State Circuits, Vol. 32, No 7, July 1997[2] where in my experiment; the bandpass filter is a part of the instrumentation amplifier mentioned above. The circuit has its requirement that must be observed. The circuit is first drawn using Mentor Graphics (Design Architecture) where all the rules and regulation for the electrical codes are obeyed. The AccuSim, one of the modules in Mentor Graphics, is used to simulate the circuit. The result is a bandpass filter with a response of a resonant frequency at 5.0873kHz a voltage gain of 25.492 (27.794dB) and a Q-factor of 3.793.