Investigation of output power in ring CW fiber laser using graphene saturable absorber

• Main Authors: Hamida, Belal Ahmed, Eltaif, Tawfig, Mohd Noh, Farhan Daniel, Khan, Sheroz
• Format: Article
• Language: English; English
• Published: Institute of Advanced Engineering and Science 2019
• Subjects: QC Physics; TK452 Electric apparatus and materials. Electric circuits. Electric networks
• Online Access: http://irep.iium.edu.my/76566/1/76566_Investigation%20of%20output%20power%20in%20ring.pdf; http://irep.iium.edu.my/76566/2/76566_Investigation%20of%20output%20power%20in%20ring_SCOPUS.pdf; http://irep.iium.edu.my/76566/; http://beei.org/index.php/EEI/article/view/1497

This paper reported the effect of different coupling ratio in continuous wave fiber laser in a ring cavity configuration. Different coupling ratios of 10/90 and 50/50 were tested. Where the output power may vary depending on the ratio and it can be applied to specific area that requires either high or low output power. In addition, generation of passive Q-switched erbium doped fiber laser (EDFL) using graphene based saturable absorber in ring cavity using different coupling ratio was experimentally investigated. As a result, wavelength centered at 1566.62nm is obtain from EDFL cavity. Moreover, the cavity using coupler of 50/50 is capable to achieve Q-switched pulses as compared to the cavity using coupler of 10/90. Where the maximum output power recorded is 336mW with pulse repetition rate of 23.74 kHz. In addition, the pulse width is 3.84µs, and pulse energy is 14.15nJ.