SIC-MMSE method based wireless precoding technique for millimetre-wave MIMO system

• Main Authors: Abdullah, Khaizuran, Boby, Rounakul Islam, Mahmud, Md, Mosammat, Saidatunnesa
• Format: Article
• Language: English; English
• Published: 2019
• Subjects: TK5101 Telecommunication. Including telegraphy, radio, radar, television
• Online Access: http://irep.iium.edu.my/72926/1/137970-342664-2-SP.pdf; http://irep.iium.edu.my/72926/7/72926%20SIC-MMSE%20Method%20based%20Wireless.pdf; http://irep.iium.edu.my/72926/; http://www.indjst.org/index.php/indjst/article/view/137970/100545

A communication method is proposed using Minimum Mean Square Error (MMSE) precoding and Successive Interference Cancellation (SIC) technique for millimetre-wave multiple-input multiple-output (mm-Wave MIMO) based wireless communication system. Background: The mm-Wave MIMO technology for wireless communication system is the base potential technology for its high data transfer rate followed by data instruction and low power consumption compared to Long-Term Evolution (LTE). The mm-Wave system is already available in indoor hotspot and Wi-Fi backhaul for its high bandwidth availability and potential lead to rate of numerous Gbps/user. But, in mobile wireless communication system this technique is lagging because the channel faces relative orthogonal coordination and multiple node detection problem while rapid movement of nodes (transmitter and receiver) occur. Methods/Improvement: To improve the conventional mm-wave MIMO nodal detection and coordination performance, the system processes data using symbolized error vector technique for linearization. Then the MMSE precoding detection technique improves the link strength by constantly fitting the channel coefficients based on number of independent service antennas (M), Signal to Noise Ratio (SNR), Channel Matrix (CM) and mean square errors (MSE). To maintain sequentially encoded user data connectivity and to overcome data loss, SIC method is used in combination with MMSE. Improvements: MATLAB was used to validate proposed system performance. Simulation analysis shown that, with the increase number of antennas use, the spectral efficiency also increased and higher then millimetre-wave MIMO or Single MMSE system. This research observed that, hybrid controller or combined control method have the better efficiency then single method, where SIC-MMSE based hybrid controller is a good example.