Influence of Wire Electrical Discharge Machining (WEDM) process parameters on surface roughness

• Main Authors: Ali, Mohammad Yeakub, Banu, Asfana, Bakar, Mazilah Abu
• Format: Conference or Workshop Item
• Language: English; English; English
• Published: IOP Publishing 2018
• Subjects: T Technology (General); TJ Mechanical engineering and machinery; TS Manufactures
• Online Access: http://irep.iium.edu.my/64016/7/64016%20Influence%20of%20Wire%20Electrical%20Discharge%20Machining.pdf; http://irep.iium.edu.my/64016/8/64016%20Influence%20of%20Wire%20Electrical%20Discharge%20Machining%20SCOPUS.pdf; http://irep.iium.edu.my/64016/19/64016_Influence%20of%20Wire%20Electrical%20Discharge%20Machining_WoS.pdf; http://irep.iium.edu.my/64016/; http://iopscience.iop.org/article/10.1088/1757-899X/290/1/012019/pdf

In obtaining the best quality of engineering components, the quality of machined parts surface plays an important role. It improves the fatigue strength, wear resistance, and corrosion of workpiece. This paper investigates the effects of wire electrical discharge machining (WEDM) process parameters on surface roughness of stainless steel using distilled water as dielectric fluid and brass wire as tool electrode. The parameters selected are voltage open, wire speed, wire tension, voltage gap, and off time. Empirical model was developed for the estimation of surface roughness. The analysis revealed that off time has a major influence on surface roughness. The optimum machining parameters for minimum surface roughness were found to be at a 10 V open voltage, 2.84 μs off time, 12 m/min wire speed, 6.3 N wire tension, and 54.91 V voltage gap.