Optimization of component in solution casted polylactic acid biocomposite by response surface methodology

• Main Authors: Mohd Apandi, Siti Nur E’zzati, Anuar, Hazleen, Buys, Yose Fachmi, Abd. Rashid, Siti Munirah Salimah, Ali, Fathilah, Manshor, Mohd Romainor
• Format: Article
• Language: English
• Published: Springer 2018
• Subjects: TP1080 Polymers, plastics and their manufacture
• Online Access: http://irep.iium.edu.my/63416/1/63416_Optimization%20of%20Component%20in%20Solution%20Casted.pdf; http://irep.iium.edu.my/63416/; https://link.springer.com/article/10.1007/s41783-017-0023-0

The significant value of renewable resources used for food packaging has motivated consumer demand, thereby driving consumers to pay closer attention to biodegradable packaging applications. Polylactic acid (PLA) together with durian skin fibre (DSF), epoxidized palm oil (EPO) and cinnamon essential oil (CEO) have been used to produce thin film via the solution casting method. This research study was conducted to optimise the potential effect of DSF content, EPO content and CEO content by determining the tensile properties of PLA biocomposites. The design of experiments (DOE) via response surface methodology was used to analyse the results. The optimum values for the tensile properties of PLA biocomposite were found at 3 wt% DSF, 5 wt% EPO and 1 wt% of CEO. The optimum tensile strength and tensile modulus of PLA composite were 24.9 MPa and 375.9 MPa, respectively. The DSF content influences the tensile properties of PLA biocomposite, followed by the EPO content and CEO content based on the analysis of variance. The P-value of both responses in the design of experiments is less than 0.05 which verifies that the tensile properties model is significant. The coefficient, R2, for tensile strength is 0.8908, while the coefficient result of the tensile modulus is 0.8916.