A narrow band BPF for UWB RFID reader circuit for frequency extraction
In this article, a narrow band, open circuited planar microstrip band pass filter has been proposed. Existing RFID reader circuits has to generate a constant chirp signal to read the conventional microstrip resonator type tag. Use of the VCO is well established for this application. However, in case...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
IJEAIS
2017
|
| Subjects: | |
| Online Access: | http://irep.iium.edu.my/58611/1/IJEAIS170907.pdf http://irep.iium.edu.my/58611/ http://www.ijeais.org/index.php/vol-1-issue-7-september-2017/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | In this article, a narrow band, open circuited planar microstrip band pass filter has been proposed. Existing RFID reader circuits has to generate a constant chirp signal to read the conventional microstrip resonator type tag. Use of the VCO is well established for this application. However, in case of large bandwidth (>4GHz) chirp generation it’s still challenging for the researchers. This problem can be mitigated by using as many numbers of mixer-filter combinations as needed. Successful implementation of this topology centres around the precise design of a very narrow (<2% fractional bandwidth) band BPF. The proposed structure has been designed, simulated and fabricated for 5.4 GHz. It is observed that the fractional bandwidth of the BPF is less than 2% of the center frequency. The simulation and measured S-Parameters are in good agreement. The final bandwidth of the designed filter is 100 MHz and the dimensions 24.3 mm X 5 mm. |
|---|