Surface quality of high speed milling of silicon carbide by using diamond coated tool

The high speed milling of silicon carbide was discussed by using flat end-mill 2 mm in diameter diamond coated tool. Ultra-precision high speed spindle attachment was used to achieve cutting tool rotation speed as high as 50,000 rpm. Special fixture was designed to minimize the chatter on work-pi...

全面介紹

Saved in:
書目詳細資料
Main Authors: Iqbal, Mohammad, Konneh, Mohamed, Md Said, Ahmad Yasir, Mohd Zaini, Azri Fadhlan
格式: Article
語言:English
English
出版: Trans Tech Publications Ltd., Switzerland 2014
主題:
在線閱讀:http://irep.iium.edu.my/39357/1/Surface_Quality_of_High_Speed_Milling_of_Silicon_Carbide-AMM.446-447.275.pdf
http://irep.iium.edu.my/39357/4/39357_Diamond%20coated%20tool_scopus.pdf
http://irep.iium.edu.my/39357/
http://www.scientific.net
標簽: 添加標簽
沒有標簽, 成為第一個標記此記錄!
實物特徵
總結:The high speed milling of silicon carbide was discussed by using flat end-mill 2 mm in diameter diamond coated tool. Ultra-precision high speed spindle attachment was used to achieve cutting tool rotation speed as high as 50,000 rpm. Special fixture was designed to minimize the chatter on work-piece surface during the machining process. Three cutting parameters were selected as independent variables of the experiments. They were spindle speed, depth of cut and feed rate. The arithmetic mean value of roughness (Ra) was measured on the work-piece surface as the response of the experiment. Result of the experiment shows that the value of surface roughness can be achieved as low as 0.150 μm. Statistical analysis was provided to study the significant of the model, interaction among the cutting parameters and their effects to the surface roughness value.