Model fitting for biodiesel yield analysis from crude palm oil (CPO)
This project involves the transesterification reaction of crude palm oil (CPO) to obtain palm oil biodiesel (POB). Five factors have been considered in the experimental design, namely reaction temperature, reaction time, agitation speed, molar ratio of methanol:CPO and Dosage of KOH. The factors wer...
Saved in:
Main Authors: | , |
---|---|
Format: | Conference or Workshop Item |
Language: | English |
Published: |
2010
|
Subjects: | |
Online Access: | http://irep.iium.edu.my/2626/1/175-_ICERT_2010.pdf http://irep.iium.edu.my/2626/ http://www.ppti.usm.my/icert |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
id |
my.iium.irep.2626 |
---|---|
record_format |
dspace |
spelling |
my.iium.irep.26262015-09-09T06:42:30Z http://irep.iium.edu.my/2626/ Model fitting for biodiesel yield analysis from crude palm oil (CPO) Kabbashi, Nassereldeen Alam, Md. Zahangir TA170 Environmental engineering This project involves the transesterification reaction of crude palm oil (CPO) to obtain palm oil biodiesel (POB). Five factors have been considered in the experimental design, namely reaction temperature, reaction time, agitation speed, molar ratio of methanol:CPO and Dosage of KOH. The factors were observed by assigning them to each level to study the conversion of crude palm oil (CPO) to palm oil methyl ester which is our biodiesel. This was carried by finding the optimal values of reaction time, 60 min, reaction temperature, 60 ºC, agitation speed, 250 rpm, molar ratio of methanol-to-oil, 10:1 (m/m), and dosage of the catalyst, 1.4 (%wt). Other experimental design and analytical tests were conducted including: density of POB at room temperature, 0.8498 kg l-1, surface tension at STP of 26.96 mN m-1, with Huh-Mason correction of 0.1, and finally free fatty acid percentage of 0.12% (equivalent to acid value of 0.26 mg KOH g-1). The quadratic sum of squares with F-value equals to 264.16 R-squared value the closest to unity 0.9978, also analysis of variance (ANOVA) has been carried out and it is found that the most significant value between all factors is the agitation speed (C) with F-value less than 1 x10-4. Polynomial regression of the quadratic model generated by the optimization software, The table above also shows that run #22 gives the highest actual yield of POME production and with the theoretical yield expected to be 93.573%. Most of the parameters are considered significant (Probability > F value is less than 0.1 or much better 0.05) except for the main factor of molar ratio methanol:CPO (D) which it probability associated of F-value is equal to 0.2553 (> 0.05) so the analysis will consider it unreliable reference to POME yield optimization. 2010-06-02 Conference or Workshop Item REM application/pdf en http://irep.iium.edu.my/2626/1/175-_ICERT_2010.pdf Kabbashi, Nassereldeen and Alam, Md. Zahangir (2010) Model fitting for biodiesel yield analysis from crude palm oil (CPO). In: 2ND INTERNATIONAL CONFERENCE ON ENVIRONMENTAL RESEARCH AND TECHNOLOGY 2010 (2ND ICERT 2010) , 2-4 June 2010, Penang, Malaysia. http://www.ppti.usm.my/icert |
institution |
Universiti Islam Antarabangsa Malaysia |
building |
IIUM Library |
collection |
Institutional Repository |
continent |
Asia |
country |
Malaysia |
content_provider |
International Islamic University Malaysia |
content_source |
IIUM Repository (IREP) |
url_provider |
http://irep.iium.edu.my/ |
language |
English |
topic |
TA170 Environmental engineering |
spellingShingle |
TA170 Environmental engineering Kabbashi, Nassereldeen Alam, Md. Zahangir Model fitting for biodiesel yield analysis from crude palm oil (CPO) |
description |
This project involves the transesterification reaction of crude palm oil (CPO) to obtain palm oil biodiesel (POB). Five factors have been considered in the experimental design, namely reaction temperature, reaction time, agitation speed, molar ratio of methanol:CPO and Dosage of KOH. The factors were observed by assigning them to each level to study the conversion of crude palm oil (CPO) to palm oil methyl ester which is our biodiesel. This was carried by finding the optimal values of reaction time, 60 min, reaction temperature, 60 ºC, agitation speed, 250 rpm, molar ratio of methanol-to-oil, 10:1 (m/m), and dosage of the catalyst, 1.4 (%wt). Other experimental design and analytical tests were conducted including: density of POB at room temperature, 0.8498 kg l-1, surface tension at STP of 26.96 mN m-1, with Huh-Mason correction of 0.1, and finally free fatty acid percentage of 0.12% (equivalent to acid value of 0.26 mg KOH g-1). The quadratic sum of squares with F-value equals to 264.16 R-squared value the closest to unity 0.9978, also analysis of variance (ANOVA) has been carried out and it is found that the most significant value between all factors is the agitation speed (C) with F-value less than 1 x10-4. Polynomial regression of the quadratic model generated by the optimization software, The table above also shows that run #22 gives the highest actual yield of POME production and with the theoretical yield expected to be 93.573%. Most of the parameters are considered significant (Probability > F value is less than 0.1 or much better 0.05) except for the main factor of molar ratio methanol:CPO (D) which it probability associated of F-value is equal to 0.2553 (> 0.05) so the analysis will consider it unreliable reference to POME yield optimization. |
format |
Conference or Workshop Item |
author |
Kabbashi, Nassereldeen Alam, Md. Zahangir |
author_facet |
Kabbashi, Nassereldeen Alam, Md. Zahangir |
author_sort |
Kabbashi, Nassereldeen |
title |
Model fitting for biodiesel yield analysis from crude palm oil (CPO) |
title_short |
Model fitting for biodiesel yield analysis from crude palm oil (CPO) |
title_full |
Model fitting for biodiesel yield analysis from crude palm oil (CPO) |
title_fullStr |
Model fitting for biodiesel yield analysis from crude palm oil (CPO) |
title_full_unstemmed |
Model fitting for biodiesel yield analysis from crude palm oil (CPO) |
title_sort |
model fitting for biodiesel yield analysis from crude palm oil (cpo) |
publishDate |
2010 |
url |
http://irep.iium.edu.my/2626/1/175-_ICERT_2010.pdf http://irep.iium.edu.my/2626/ http://www.ppti.usm.my/icert |
_version_ |
1643604997369233408 |
score |
13.18916 |