A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools
Abstract. Tool life sharply reduced for all the carbide tools while increasing cutting speed twice (from 500m/min to 1000m/min) during machining cast iron. Though the productivity would be double at the speed of 1000m/min than that at the speed of 500m/min, tool wear increases to a few times which i...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Book Chapter |
| Language: | English |
| Published: |
International Islamic University Malaysia
2011
|
| Subjects: | |
| Online Access: | http://irep.iium.edu.my/25559/2/Chapter_35.pdf http://irep.iium.edu.my/25559/ http://rms.research.iium.edu.my/bookstore/default.aspx |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|