Influence of machining parameters on surface roughness during EDM of mild steel
Abstract. The present paper reports on the influence of process parameters on surface roughness of mild steel during EDM using a copper electrode. Surface quality was evaluated on the basis of work surface roughness, micro cracks and thickness of the recast layer. Current, pulse-on time, pulse-off t...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Book Chapter |
| Language: | English |
| Published: |
International Islamic University Malaysia
2011
|
| Subjects: | |
| Online Access: | http://irep.iium.edu.my/25550/2/Chapter_7.pdf http://irep.iium.edu.my/25550/ http://rms.research.iium.edu.my/bookstore/default.aspx |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Abstract. The present paper reports on the influence of process parameters on surface roughness of mild steel during EDM using a copper electrode. Surface quality was evaluated on the basis of work surface roughness, micro cracks and thickness of the recast layer. Current, pulse-on time, pulse-off time and voltage were the variable parameters for the present investigation. It was found that pulse-on time is the most significant factor for work surface roughness. With increase in pulse-on time the work material gets more time to absorb heat and more melting and vaporization of material takes place producing a rough surface. Work surface roughness was also found to increase with increase in current. A higher current produces a spark of higher energy removing more material and leaving a larger crater that results a rough surface. An increase in voltage also results a poorer surface, but voltage demonstrated to have a very small effect on job surface roughness. |
|---|