Tool wear rate during electrical discharge machining (EDM) with eccentric electrode
Abstract. In this chapter the influence of spindle speed and feed rate on electrode wear rate has been described during EDM with an eccentric electrode. It was found that both spindle speed and feed rate causes increase in electrode wear rate.
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Book Chapter |
| Language: | English |
| Published: |
International Islamic University Malaysia
2011
|
| Subjects: | |
| Online Access: | http://irep.iium.edu.my/25545/2/Chapter_1.pdf http://irep.iium.edu.my/25545/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|