Solar Eletrical Power Generation Stabilization System(Select_PGSS)

• Main Author: Muhammad Imran Iskandar bin Ibrahim, Muhammad Imran Iskandar
• Format: Final Year Project
• Language: English
• Published: Universiti Teknologi Petronas 2011
• Subjects: TK Electrical engineering. Electronics Nuclear engineering
• Online Access: http://utpedia.utp.edu.my/770/1/FYP1101-Muhammad_Imran_Iskandar.pdf; http://utpedia.utp.edu.my/770/

The demand for electricity is increasing annually, where it is projected that in the year 2030, the total demand in Malaysia will be 100Mtoe. Under the earlier Malaysian Plans, the four fuel diversification policy that was introduced focused on oil, gas, coal and hydro. But in the 8th Malaysian plan, the scope was broadened to include renewable energy resources as the new five fuel strategy, which was implemented, starting from 1999. The main challenge facing the renewable power sector is sustainability that is needed to ensure the security and reliability of electricity generation, generally and the need to stabilize renewable based electricity. The conventional electricity generating systems face problems such as high volatility in fuel prices and also possibility of fossil fuel depletion, sooner than projected. The focus of this project is on Solar Electricity Generating Systems (SEGS). Although SEGS are already being implemented, but issues due to the intermittent nature of solar insolation, which is highly dependent on meteorological conditions and on the apparent trajectory of the sun, the electricity generated is not stable. Usually, a simple charge controller is used to control the charging of the batteries. A comprehensive power conditioning system is required to improve the quality of power supplied directly to load, and the batteries as well. A voltage stabilizer plays an important role, and in this study, it is achieved by combining the boost, buck, and buck-boost converters topologies in a single circuit. The prototype stabilizer that was built can produce output as high as 20V and the desired value of the output can be set by the user digitally. The operating range of voltage of the stabilizer is between 3V and 19V. It is controlled by PIC16F877. The ripple of the stabilizer is around 22%.