MATERIAL FLOW STUDY DTTRING FRICTION STIR WELDING OF DISSIMILAR MATERIAL
This research focuses on the material flow study of aluminium alloy 6092lSiC/25p metal matrix composite welded plate. In this research, friction stir welding is used as the joining method to join aluminium alloy 6061 and aluminium alloy 6092lSiC/25p metal matrix composite welded plate. Two differ...
Saved in:
Main Author: | |
---|---|
Format: | Final Year Project |
Language: | English |
Published: |
Universiti Teknologi Petronas
2012
|
Subjects: | |
Online Access: | http://utpedia.utp.edu.my/6447/1/ME_KON%20KIT%20LUNG.pdf http://utpedia.utp.edu.my/6447/ |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
id |
my-utp-utpedia.6447 |
---|---|
record_format |
eprints |
spelling |
my-utp-utpedia.64472017-01-25T09:40:42Z http://utpedia.utp.edu.my/6447/ MATERIAL FLOW STUDY DTTRING FRICTION STIR WELDING OF DISSIMILAR MATERIAL KON KIT LUNG, KON KIT LUNG TJ Mechanical engineering and machinery This research focuses on the material flow study of aluminium alloy 6092lSiC/25p metal matrix composite welded plate. In this research, friction stir welding is used as the joining method to join aluminium alloy 6061 and aluminium alloy 6092lSiC/25p metal matrix composite welded plate. Two different configurations are focused in this research. A4606l plate is placed at advancing side and AA6092 MMC is placed at retreating side in configuration I and vice versa in configuration 2. First of all, suitable FSW tool with tapered angle is designed and fabricated following by determine the acceptable FSW pararneters (feed rate and rotational speed) with least defects. FSW final nrn on both configurations are executed with acceptable parameters. Samples are collected from each configuration to be observed under optical microscope to achieve the main objective which is to study the material flow of silicon carbide in the weld zone in both configurations. The research has been successfully carried out and its findings showed that configuration 2 where AA6092 MMC is placed at advancing side has better FSW result wittt less wear at surface and minimal weld hole spotted. Apart from that, there is more SiC particles circulation from advancing to retreating side in configuration 2. This finding is proven by microhardness testing which showed that configuration 2 has average higher HV value as compared to configuration I and the zone with more sic particles gave higher HV value. Universiti Teknologi Petronas 2012-05 Final Year Project NonPeerReviewed application/pdf en http://utpedia.utp.edu.my/6447/1/ME_KON%20KIT%20LUNG.pdf KON KIT LUNG, KON KIT LUNG (2012) MATERIAL FLOW STUDY DTTRING FRICTION STIR WELDING OF DISSIMILAR MATERIAL. Universiti Teknologi Petronas. (Unpublished) |
institution |
Universiti Teknologi Petronas |
building |
UTP Resource Centre |
collection |
Institutional Repository |
continent |
Asia |
country |
Malaysia |
content_provider |
Universiti Teknologi Petronas |
content_source |
UTP Electronic and Digitized Intellectual Asset |
url_provider |
http://utpedia.utp.edu.my/ |
language |
English |
topic |
TJ Mechanical engineering and machinery |
spellingShingle |
TJ Mechanical engineering and machinery KON KIT LUNG, KON KIT LUNG MATERIAL FLOW STUDY DTTRING FRICTION STIR WELDING OF DISSIMILAR MATERIAL |
description |
This research focuses on the material flow study of aluminium alloy 6092lSiC/25p metal matrix
composite welded plate. In this research, friction stir welding is used as the joining method to
join aluminium alloy 6061 and aluminium alloy 6092lSiC/25p metal matrix composite welded
plate. Two different configurations are focused in this research. A4606l plate is placed at
advancing side and AA6092 MMC is placed at retreating side in configuration I and vice versa
in configuration 2. First of all, suitable FSW tool with tapered angle is designed and fabricated
following by determine the acceptable FSW pararneters (feed rate and rotational speed) with
least defects. FSW final nrn on both configurations are executed with acceptable parameters.
Samples are collected from each configuration to be observed under optical microscope to
achieve the main objective which is to study the material flow of silicon carbide in the weld zone
in both configurations. The research has been successfully carried out and its findings showed
that configuration 2 where AA6092 MMC is placed at advancing side has better FSW result wittt
less wear at surface and minimal weld hole spotted. Apart from that, there is more SiC particles
circulation from advancing to retreating side in configuration 2. This finding is proven by microhardness
testing which showed that configuration 2 has average higher HV value as compared to
configuration I and the zone with more sic particles gave higher HV value. |
format |
Final Year Project |
author |
KON KIT LUNG, KON KIT LUNG |
author_facet |
KON KIT LUNG, KON KIT LUNG |
author_sort |
KON KIT LUNG, KON KIT LUNG |
title |
MATERIAL FLOW STUDY DTTRING FRICTION STIR WELDING OF DISSIMILAR MATERIAL |
title_short |
MATERIAL FLOW STUDY DTTRING FRICTION STIR WELDING OF DISSIMILAR MATERIAL |
title_full |
MATERIAL FLOW STUDY DTTRING FRICTION STIR WELDING OF DISSIMILAR MATERIAL |
title_fullStr |
MATERIAL FLOW STUDY DTTRING FRICTION STIR WELDING OF DISSIMILAR MATERIAL |
title_full_unstemmed |
MATERIAL FLOW STUDY DTTRING FRICTION STIR WELDING OF DISSIMILAR MATERIAL |
title_sort |
material flow study dttring friction stir welding of dissimilar material |
publisher |
Universiti Teknologi Petronas |
publishDate |
2012 |
url |
http://utpedia.utp.edu.my/6447/1/ME_KON%20KIT%20LUNG.pdf http://utpedia.utp.edu.my/6447/ |
_version_ |
1739831350262759424 |
score |
13.160551 |