Cementing Design For the HPHT Well By Using Land Mark Software
This study is aimed that how to reduce the results of failed cement job which involved time and high cost, remedial work and causes kick and well control problem. It needs an extra care from time to time and soft wares used in order to monitor all characteristic of the cement during the cementing...
Saved in:
Main Author: | |
---|---|
Format: | Final Year Project |
Language: | English |
Published: |
Universiti Teknologi PETRONAS
2013
|
Subjects: | |
Online Access: | http://utpedia.utp.edu.my/10696/1/MY%20FYP%201%20final%20report.pdf http://utpedia.utp.edu.my/10696/ |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | This study is aimed that how to reduce the results of failed cement job which involved time
and high cost, remedial work and causes kick and well control problem. It needs an extra care
from time to time and soft wares used in order to monitor all characteristic of the cement
during the cementing job.
The objective of this work is to design the proper cement program which is compatibale with
the formation , that which would be the case study.
The methodolgy is based on the finding of the class of cement , to know the zone and
interval and on the rheology of the cement. We will then be using the opticem soft ware to
proceed with the results.
This research and studies, has helped us to solve the problem by designing the suitable
cement program. Over all data was used in Opticem module to stimulate and observe casing
cementing procedures. |
---|