Use of ultrasonic velocity travel time to estimate uniaxial compressive strength of granite and schist in Malaysia
The uniaxial compressive strength (UCS) is one of the most common mechanical parameters required in geotechnical engineering to characterize the compressive strength of rock material. Measurements of UCS are expensive, time consuming, destructive and thus, not favorable in the presence of limited...
Saved in:
Main Authors: | , , , , |
---|---|
Format: | Article |
Language: | English |
Published: |
Universiti Kebangsaan Malaysia
2016
|
Online Access: | http://journalarticle.ukm.my/9671/1/04_Goh_Thian_Lai.pdf http://journalarticle.ukm.my/9671/ http://www.ukm.my/jsm/malay_journals/jilid45bil2_2016/KandunganJilid45Bil2_2016.html |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | The uniaxial compressive strength (UCS) is one of the most common mechanical parameters required in geotechnical
engineering to characterize the compressive strength of rock material. Measurements of UCS are expensive, time consuming,
destructive and thus, not favorable in the presence of limited samples. Therefore, a simple yet practical application is
needed for the estimation of UCS. This research presents two correlations to predict UCS values for granite and schist by
using ultrasonic velocity travel time (tp
) from ultrasonic tests. The validity of the practical approach presented in this
research is confirmed based on the strong correlations developed from the experimental tests conducted. For the entire
data set, the correlation between UCS and ultrasonic velocity travel time was expressed as UCS = 217.2 e-0.016(tp) for granite
and UCS = 1110.6 e-0.037(tp) for schist and the coefficient of determination (R2
) value for both granite and schist is 0.93.
These correlations may be useful for applications related to geotechnical engineering designs. |
---|