Microstrip antenna with reflector and air gap for short range communication in 900 MHz band
This paper proposes a microstrip antenna that was made of a microstrip fed slot with a complimentary stub on a single dielectric medium. This antenna was integrated with a reflector and air gap for the application of short range communication (SRC) in a 900 MHz band. Analyses were made on the dimens...
Saved in:
| Main Authors: | , , , |
|---|---|
| 格式: | Article |
| 语言: | English |
| 出版: |
Institute of Advanced Engineering and Science
2023
|
| 在线阅读: | http://eprints.utem.edu.my/id/eprint/28107/2/01627010920241644251073.pdf http://eprints.utem.edu.my/id/eprint/28107/ https://beei.org/index.php/EEI/article/view/5515/3621 |
| 标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
| 总结: | This paper proposes a microstrip antenna that was made of a microstrip fed slot with a complimentary stub on a single dielectric medium. This antenna was integrated with a reflector and air gap for the application of short range communication (SRC) in a 900 MHz band. Analyses were made on the dimension of the reflector and the height of the air gap towards the antenna performance. Besides, an antenna field test was done for the propagation distance of the proposed antenna. As a result, with the antenna size of 13,770 mm2, the measured return loss was-10.79 dB and the directivity gain was 7.44 dBi. Besides, with the effective isotropic radiated power (EIRP) of 7.44 dBm, it was predicted that at 100 m, the received signal would be around 60 to 70 dBm. Therefore, a high gain was produced by using a reflector with air gap and a compact size was achieved if compared to conventional high gain antenna designs such as Yagi Uda. Thus, it is suitable for a communication device such as the SRC application. |
|---|