Tuning of PID controller for a synchronous machine connected to a non-linear load

This paper proposes a method of determining the optimal proportional integral derivative (PID) controller parameters using the particle swarm optimization (PSO) technique. The stability of the power system is an important factor in the operation of any electric system. A PID controller with a power...

全面介绍

Saved in:
书目详细资料
Main Authors: Kasilingam G., Pasupuleti J.
其他作者: 55812078500
格式: Article
出版: Asian Research Publishing Network 2023
标签: 添加标签
没有标签, 成为第一个标记此记录!
实物特征
总结:This paper proposes a method of determining the optimal proportional integral derivative (PID) controller parameters using the particle swarm optimization (PSO) technique. The stability of the power system is an important factor in the operation of any electric system. A PID controller with a power system stabilizer (PSS) has been developed to maintain the stability and enhance the performance of the power system. Optimization of PID parameters is an important problem in control engineering. A PSO algorithm has been proposed to tune the parameters of the PID controller. The effectiveness of the PID-based PSS has been tested on a single-machine infinite-bus (SMIB) system having a three-phase thyristor-based non-linear load with different kinds of faults. Analysis shows that the dynamic performance with the proposed method is better compared with the conventional trial-and-error method. The speed deviation, rotor angle deviation and load angle were compared in a Simulink-based MATLAB environment. The simulations show that the proposed method damps optimally and suppresses errors to a minimum. © 2006-2014 Asian Research Publishing Network (ARPN).