封面圖片

Shrinkages and warpage in the processability of wood-filled polypropylene composite thin-walled parts formed by injection molding

Link to publisher's homepage at http://www.elsevier.com/

Saved in:

書目詳細資料
Main Authors:	Mohd. Azaman, Md Deros, Mohd Sapuan, Salit, Prof. Ir. Dr., Shamsuddin, Sulaiman, Prof. Dr., Edi Syams, Zainudin, Prof. Madya Dr., Khalina, Abdan
其他作者:	azaman@unimap.edu.my
格式:	Article
語言:	English
出版:	Elsevier Ltd. 2014
主題:	Injection molding Lignocellulosic composite Thin-walled parts Volumetric shrinkage Warpage
在線閱讀:	http://dspace.unimap.edu.my:80/dspace/handle/123456789/32792
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Optimization and numerical simulation analysis for molded thin-walled parts fabricated using wood-filled polypropylene composites via plastic injection molding
由: Mohd Azaman, Md Deros, et al.
出版: (2016)

Optimal process conditions of warpage with thin-shallow features molded with pin-point gating system
由: Mohd Fathullah, Ghazli@Ghazali, et al.
出版: (2016)

The influence of different mold temperature on warpage in a thin shallow injection molding process
由: Norshah Afizi, Shuaib, et al.
出版: (2014)

Shrinkage and warpage on front panel housing using Genetic Algorithm (GA)
由: Muhammad Ezuddin, Shafiee
出版: (2021)

Optimization of the plastic injection molding parameters for sport equipment by using design of experiment
由: Radhwan, Hussin, et al.
出版: (2014)

A study on two plate and three plate mold of ultra thin plates in minimizing warpage issue
由: Mohd. Fathullah, Ghazli @ Ghazali, et al.
出版: (2016)

Strength of the weld line and warpage defects on the molded parts in injection molding process
由: S. M., Nasir, et al.
出版: (2014)

Warpage analyses on thin plate in three-plate mold by Taguchi method and analysis of variance (ANOVA) for PC, ABS and PC/ABS
由: Shayfull Zamree, Abd Rahim, et al.
出版: (2014)

Warpage analyses on thin plate in three-plate mold by Taguchi method and analysis of variance (ANOVA) for PC, ABS and PC/ABS
由: Shayfull Zamree, Abd Rahim, et al.
出版: (2014)

Optimization on parameter settings in determining warpage factors of a side-gated thin shallow part injection molding for PP, ABS & PC+ABS materials
由: Norshah Afizi, Shuaib, et al.
出版: (2014)

Warpage optimization on ultra thin plate in three plate mold for PP, ABS & ABS+PC materials by using Taguchi method
由: Mohd. Nasir, Mat Saad, et al.
出版: (2013)

A study of thin shell plastic part quality in the plastic injection molding
由: Norazmimi, Zahari
出版: (2016)

Minimization on warpage defect in injection molding part of ABS (Acrylonitrile Butadiene Styrene) material by using design of experiment (DOE)
由: Radhwan, Hussin, et al.
出版: (2016)

Numerical simulation analysis of unfilled and filled reinforced polypropylene on thin-walled parts formed using the injection-moulding process
由: Mohd Azaman, Md Deros, et al.
出版: (2016)

An investigation of the processability of natural fibre reinforced polymer composites on shallow and flat thin-walled parts by injection moulding process
由: Mohd. Azaman, Md Deros, et al.
出版: (2014)

Comparison between single and multi gates for minimization of warpage using taguchi method in injection molding process for ABS material
由: Mohd. Nasir, Mat Saad, et al.
出版: (2014)

Numerical simulation on moulded thin-walled parts via injection moulding process
由: Azaman, Md Deros, et al.
出版: (2016)

Analysis of Warpage on front panel housing using Response Surface Methodology
由: Mohd Afiq, Harun
出版: (2021)

A study of thin shell plastic part quality in the plastic injection molding
由: Norazmimi, Zahari
出版: (2016)

Warpage analysis between straight and conformal cooling channels on thin shallow shell
由: Norshah Afizi, Shuaib, et al.
出版: (2016)

Analysis of shrinkage on thick plate part using genetic algorithm
由: Siti Noor Najihah, Mohd Nasir
出版: (2021)

Application of RSM to optimise moulding conditions for minimizing shrinkage in thermoplastic processing
由: Mohd Nasir, Mat Saad, et al.
出版: (2016)

Warpage minimisation on side arm using response surface methodology (RSM)
由: Shazzuan, Shahari
出版: (2017)

Simulation and correlation of the melt flow characteristic using Polystyrene in usymmetrical cavity injection mold
由: Abdulla Mahmoud, Ahmed
出版: (2019)

Optimization of injection moulding process using Bat Algorithm through simulation study
由: Mohammad ‘Amir ‘Izzat, Mohd Fadzil
出版: (2021)

Warpage analysis between straight and conformal cooling channels on thin shallow shell
由: Norshah Afizi, Shuaib, et al.
出版: (2014)

Numerical simulation analysis of the in-cavity residual stress distribution of lignocellulosic (wood) polymer composites used in shallow thin-walled parts formed by the injection moulding process
由: Mohd Azaman, Md Deros, et al.
出版: (2014)

Improving warpage on thin shallow parts in two-plate moulds with conformal cooling channels
由: Shayfull Zamree, Abd. Rahim, et al.
出版: (2014)

Shrinkages and warpage in the processability of wood-filled polypropylene composite thin-walled parts formed by injection molding
由: Md Deros, Mohd. Azaman, et al.
出版: (2013)

Optimization of injection molding parameter in processing polypropylene using Taguchi method / Mohamad Adib Adam Abd Wahab
由: Abd Wahab, Mohamad Adib Adam
出版: (2017)

Design, Analysis and Fabrication of Plastic Injection Mould for Tensile Test Specimen
由: Mohd Ariffin, Mohd Khairol Anuar
出版: (2001)

An interchangeable turning sprue bushing (ITSB) system in a family mould / Saiful Bahri Mohd Yasin
由: Mohd Yasin, Saiful Bahri
出版: (2014)

Characterization of fabricated feedstock using nano powders and a water-soluble binder in micro metal injection molding
由: Javad, Rajabi, et al.
出版: (2014)

Characterization of fabricated feedstock using nano powders and a water-soluble binder in micro metal injection molding
由: Javad, Rajabi, et al.
出版: (2014)

Numerical simulation analysis of the in-cavity residual stress distribution of lignocellulosic (wood) polymer composites used in shallow thin-walled parts
由: Mohd Azaman, Md Deros, et al.
出版: (2014)

A study on design and develop a concurrent problem solving method in mould flow analysis
由: Wahizatun Akmar, Abd Wahab
出版: (2014)

Warpage optimisation using Recycled Polycar-bonates (PC) on Front Panel Housing
由: Shayfull Zamree, Abd Rahim, et al.
出版: (2021)

Improving the quality and productivity of molded parts with a new design of conformal cooling channels for the injection molding process
由: Shayfull Zamree, Abd Rahim, et al.
出版: (2016)

Mini injection molding machine / Dayangku Dalalin Amirah Awang Horolni and Ahmad Najmie Rusli
由: Awang Horolni, Dayangku Dalalin Amirah, et al.
出版: (2023)

Milled groove square shape conformal cooling channels in injection molding process
由: Shayfull Zamree, Abd. Rahim, et al.
出版: (2014)