Optimum Operating Parameters for Hollow Fiber Membranes in Direct Contact Membrane Distillation
The aim of this study is the optimization of the operating conditions of PVDF-co-HFP hollow fiber membrane for direct contact membrane distillation applications. The influence of the operation parameters, such as the feed temperature (40–80 \({^{\circ} {C}}\)), the feed flow rate (0.3–0.6L/min), and...
محفوظ في:
| المؤلفون الرئيسيون: | , , |
|---|---|
| التنسيق: | مقال |
| اللغة: | English |
| منشور في: |
Springer
2016
|
| الموضوعات: | |
| الوصول للمادة أونلاين: | http://umpir.ump.edu.my/id/eprint/14328/1/Optimum%20Operating%20Parameters%20for%20Hollow.pdf http://umpir.ump.edu.my/id/eprint/14328/ http://dx.doi.org/10.1007/s13369-016-2178-3 |
| الوسوم: |
إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
|
| الملخص: | The aim of this study is the optimization of the operating conditions of PVDF-co-HFP hollow fiber membrane for direct contact membrane distillation applications. The influence of the operation parameters, such as the feed temperature (40–80 \({^{\circ} {C}}\)), the feed flow rate (0.3–0.6L/min), and the PVP content (0–9%), as well as the feed concentration increased from 3.5 to 5.0 wt%, and their interactions on the PVDF-co-HFP hollow fiber membrane permeate flux have been investigated. The optimum operating parameters have been specified using second-order FULL FACTORIAL and Taguchi optimization techniques to find optimum values for operation parameters in the DCMD process in order to obtain a good value of permeate flux. The results showed that PVDF-co-HFP membrane has the best performance at 21 (\({{kg/m}^{2} \,{h}}\)) when a hot feed temperature of 80\({^{\circ} {C}}\) with 0.6 L/min flow rate, 3.5wt% NaCl feed concentration and 9 wt% PVP content in the casting solution were used. The PVP % content and inlet temperature had a significant impact on the permeate flux, while feed flow rate and feed concentration have less influence. |
|---|