Optimize single line to ground fault detection in distribution grid power system using artificial bee colony
The most common power system (PS) distribution network fault, single lineto-ground fault (SLGF), causes residual current (I res) to start an electrical arc and high voltage (HV) three times the rated voltage in other healthy phases. HV from capacitive currents (IC) damages cable insulation and PS a...
Saved in:
| Main Authors: | , , , , , , |
|---|---|
| Format: | Article |
| Language: | en |
| Published: |
Ijeecs
2023
|
| Subjects: | |
| Online Access: | http://eprints.uthm.edu.my/10604/1/J16587_ecc4988cda28a942d4cfae1140f876ac.pdf http://eprints.uthm.edu.my/10604/ https://doi.org/ 10.11591/ijeecs.v31.i3 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The most common power system (PS) distribution network fault, single lineto-ground fault (SLGF), causes residual current (I res) to start an electrical arc and high voltage (HV) three times the rated voltage in other healthy phases.
HV from capacitive currents (IC) damages cable insulation and PS appliances. Peterson The neutral point coil (PC) reduces (I res) and extinguishes the electric arc, but the fault current (I fault) remains below the protection devices'
threshold. Operations and equipment are riskier. PC adaptive eliminates electrical arcs, making the network safer. This paper detects I faults online using Texas instrument validation in MATLAB and adaptive by artificial bee colony (ABC). This paper discusses Texas instrument fault current detection
and MATLAB validation. It improves system reliability, device protection, and copper savings by thousands of tons. ABC intelligently optimizes many mathematical problems. ABC with network neural artificial intelligence (AI) improves algorithm performance (artificial bee colony network neural
(ABCNN)). This new method may improve distribution network SLGF detection. This first work can work online in electrical power stations by building the (eZdsp F28335-RS232) into the program to send fault signals to the control when SLGF occurs without damaging devices, equipment, cables,
or power outages. |
|---|
